Model Range:
3 Cell 2 Volt 3 Cell 6 Volt 4 Cell 12 Volt 2 Cell 24 Volt

4 Cell Automatic Battery Charger
Model : ABC – X – 12V – 4B – YYYA - A

Features:

  • Suitable for charging 1 to 4 Nos. 12V Batteries Simultaneously. Very useful for large Battery user.

  • Highly efficient SMPS based design with constant voltage charging facility, protects Batteries / Cells from overcharging.

  • Fully protected against over voltage, short circuit, over temperature and Battery Reverse Connections.

  • Charging current limit Adj. pot provided to limit maximum charging current, to protect Battery / Cell from overheating.

 4 Cell 12V Battery Charger

Specification for 4 Cell Automatic Battery Charger
Model : ABC – X – 12V – 4B – YYYA - A

1.

Input Voltage

X

Nominal Input Voltage

Input Voltage Range

1

110 VAC Single Phase

90 – 132 VAC

2

230 VAC Single Phase

180 – 264 VAC

12

110/230 VAC Switchable Single Phase

90-132 / 180 - 264 VAC 

2.

Frequency

: 47-63 Hz

3.

Input

: Through 3 core cable and 15 A 3 pin plug provided on the side of   
Battery Charger.

4.

Battery Charger ON/OFF Switch

: 16 Amp rating Rocker Switch with Neon Indicating lamp Provided
on the Front Panel.

5.

Battery Charging Voltage

Sr.
No.

No.
Cell

Nom.
Voltage

Float Voltage
Adjustment
 Range

Boost Voltage
Adjustment Range

1

1 Cell

12 V

12.6 V - 14.6 V

13.6 V–15.6V

2

2 Cell

24 V

26.2 V – 28.2 V

28.2 V – 30.2 V

3

3 Cell

36 V

39.6 V – 41.6 V

42.8 V – 44.8 V

4

4 Cell

48 V

53.4 V - 55.4 V

57.4 V - 59.4 V

6.

a. Charging Current
b. Code YYYA
c. Max Current @12V
d. Max Current @24V
e. Max Current @36V
f. Max Current @48V

35 Amps max

55 Amps max

70 Amps max

82 Amps max

35 A

55 A

70 A

82 A

35 A

55 A

70 A

82 A

20 A

30 A

35 A

41 A

12 A

18 A

23 A

28 A

10 A

15 A

18 A

21 A

7.

Charging Current

: Maximum charging current can be Adjusted  from 10 % to 100 % of 
Current rating with multiturn pot.  Maximum charging current limit
should be set as per battery capacity.

8.

Battery Switch

MCB 25A,
1 pole

MCB 40A,
1 pole

MCB 50A,
1 pole

MCB 63A,
1 pole

9.

Protections

: Battery Charger protected against Over Load, Short Circuit, Over Voltage,
Over Temperature & Reverse Input.

10.

Display
Voltmeter

Current Meter

3 ½ Digit DPM for displaying Battery / Charger Voltage (in Volts)
Accuracy 0.2V +/- 2 Digits

3 ½ Digit DPM for displaying charging current (in Amp).
Accuracy 0.2V +/- 2 Digits

11.

Battery Connector

TB56 Series 8 Position

12.

Charging Stages

: Boost charge
: Float charge

13.

Indications

: Red LED for Boost stage
: Green LED for Float stage (Indicating   Battery  is fully charged )
: Red LED to indicate Reverse Battery Connection.

14.

Enclosure

: IP 20.

15.

Mounting

: Provision for Table top and wall / Panel mounting.

16.

Size

: 320(W) x 350(H) x 150(D) MM

17.

Weight

: 13 Kg.

Specifications subject to change without notice.

 TOP