Model Range:
3 Cell 2 Volt 3 Cell 6 Volt 4 Cell 12 Volt 2 Cell 24 Volt

3 Cell Automatic Battery Charger
Model : ABC – X – 2V – 3B – YYYA - A

Features:

  • Switch select facility for charging one, two or three cell of Battery bank.

  • Highly efficient SMPS based design with constant voltage charging facility, protects Batteries / Cells from overcharging.

  • Fully protected against over voltage, short circuit, over temperature and Battery Reverse Connections.

  • Charging current limit Adj. pot provided to limit maximum charging current, to protect Battery / Cell from overheating.

 3 Cell 2V Battery Charger

Specification for 3 Cell Automatic Battery Charger
Model : ABC – X – 2V – 3B – YYYA - A

1.

Input Voltage

X

Nominal Input Voltage

Input Voltage Range

1

110 VAC Single Phase

90 – 132 VAC

2

230 VAC Single Phase

180 – 264 VAC

12

110/230 VAC Switchable Single Phase

90-132 / 180 - 264 VAC 

2.

Frequency

: 47-63 Hz

3.

Input

: Through 3 core cable and 15 A 3 pin plug provided on the side of   
Battery Charger.

4.

Battery Charger ON/OFF Switch

: 16 Amp rating Rocker Switch with Neon Indicating lamp Provided
on the Front Panel.

5.

Battery Charging Voltage

Sr.No

No. Cell

Nom. Voltage

Float Voltage
Adjustment Range

Boost Voltage
Adjustment Range

1

1 Cell

2V

2.18V – 2.38V

2.35V – 2.55V

2

2 Cell

4V

4.36V – 4.76V

4.75V – 5.05V

3

3 Cell

6V

6.64V – 7.04V

7.15V – 7.55V

6.

a. Charging Current
b. Code YYYA
c. Max Current @2V
d. Max Current @4V
e. Max Current @6V

100 Amps max.

160 Amps max.

200 Amps max.

240 Amps max.

100 A

160 A

200 A

240 A

100 A

160 A

200 A

240 A

100 A

160 A

200 A

240 A

70 A

100 A

135 A

165 A

7.

Charging Current

: Maximum charging current can be Adjusted  from 10 % to 100 % of 
Current rating with multiturn pot.  Maximum charging current limit
should be set as per battery capacity.

8.

Battery Switch

MCB 40A,
2 pole

MCB 63A,
2 pole

MCB 50A,
3 pole

MCB 63A,
3 pole

9.

Protections

: Battery Charger protected against Over Load, Short Circuit, Over Voltage,
Over Temperature & Reverse Input.

10.

Display
Voltmeter

Current Meter

3 1/2 Digit DPM for displaying Battery / Charger voltage (in volts).
Accuracy 0.2V +/- 2 digits 

3 1/2 Digit DPM for displaying charging current (in Amp).
Accuracy 0.2A +/- 2 digits 

4 1/2 Digit DPM for displaying charging current (in Amp).
Accuracy 0.2A +/- 2 digits 

11.

Battery Connector

Bus bar with 5/16” threaded STUD, 1 each for +ve & -ve

12.

Charging Stages

: Boost charge
: Float charge

13.

Indications

: Red LED for Boost stage
: Green LED for Float stage (Indicating   Battery  is fully charged )
: Red LED to indicate Reverse Battery Connection.

14.

Enclosure

: IP 20.

15.

Mounting

: Provision for Table top and wall / Panel mounting.

16.

Size

: 320(W) x 350(H) x 150(D) MM

17.

Weight

: 13 Kg.

Specifications subject to change without notice.

 TOP