Model Range:
2 Volt 4 Volt 6 Volt 12 Volt 24 Volt 48 Volt 110 Volt

24V Automatic Battery Charger
Model : ABC – X – 24V – 1B – YYYA - A

Features :-

  1. Available in 4 models with different Maximum Current rating to suite exact Battery Capacity.
  1. Industrial Battery Charger with very high current charging capacity up to 41 Amp. Suitable to charge 410 Ah Battery at C/10 rate.
  1. Fast and efficient 3 stage Smart Battery Charger with protection against over charging.
  1. Suitable for Bus, tractor and other heavy duty Battery Charging.
24V Battery Charger

Specification for 24V Automatic Battery Charger
Model : ABC – X – 24V – 1B – YYYA - A

1.

Input Voltage

X

Nominal Input Voltage

Input Voltage Range

1

110 VAC Single Phase

90 – 132 VAC

2

230 VAC Single Phase

180 – 264 VAC

12

110/230 VAC Switchable Single Phase

90-132 / 180 - 264 VAC 

2.

Frequency

: 47-63 Hz

3.

Input

: Through 3 core cable and 15 A 3 pin plug provided on the side of   
Battery Charger.

4.

Battery Charger ON/OFF Switch

: 16 Amp rating Rocker Switch with Neon Indicating lamp Provided
on the Front Panel.

5.

Battery Charging Voltage
(1) Auto mode

 

 

(2) Manual mode

 
: (1) 29.2 V+/- 0.5V in Boost & Absorption mode.
Boost voltage fine adjustment through preset on the front panel.
Adjustment range 28.7 V to 29.7 V.
: (2) 27.2 V +/- 0.5V in Float mode
Float voltage fine adjustment through preset on the front panel.
Adjustment range 26.7 V to 27.7 V.
: (1) Continuously adjustable from 26.5 V+/- 0. 5 V to 30 V+/- 0.5 V
through multiturn pot.

6.

Current Ratings
Code YYYA

20 Amps Max

30 Amps Max

35 Amps Max

41 Amps Max

20A

30A

35A

41A

7.

Charging Current

: Maximum charging current can be Adjusted  from 10 % to 100 % of 
Current rating with multiturn pot.  Maximum charging current limit
should be set as per battery capacity.

8.

Battery Switch

MCB 16A,
1 pole

MCB 20A,
1 pole

MCB 25A,
1 pole

MCB 32A,
1 pole

9.

Protections

: Battery Charger protected against Over Load, Short Circuit, Over Voltage,
Over Temperature & Reverse Input.

10.

Display
Voltmeter

Current Meter

3 1/2 Digit DPM for displaying Battery / Charger voltage (in volts).
Accuracy 0.2V +/- 2 digits 

3 1/2 Digit DPM for displaying charging current (in Amp).
Accuracy 0.2A +/- 2 digits

11.

Battery Connector

TB 56 series 8 position

12.

Charging Stages

 

: Boost charge
: Absorption charge
: Float charge

13.

Indications

: Red LED for Boost stage
: Yellow LED for Absorption stage
: Green LED for Float stage (Indicating   Battery  is fully charged )
: Red LED to indicate Reverse Battery Connection.
: Green LED each for Manual & Auto Mode.

14.

Enclosure

: IP 20.

15.

Mounting

: Provision for Table top and wall / Panel mounting.

16.

Size

: 320(W) x 350(H) x 150(D) MM

17.

Weight

: 13 Kg.

Specifications subject to change without notice.

TOP