Model Range:
2 Volt 4 Volt 6 Volt 12 Volt 24 Volt 48 Volt 110 Volt

110V Automatic Battery Charger
Model : ABC – X – 110V – 1B – YYYA - A

Features :-

  1. Available in 4 models with different Maximum Current rating to suite exact Battery Capacity.
  1. Industrial Battery Charger with very high current charging capacity up to 10 Amp. Suitable to charge 100 Ah Battery at C/10 rate.
  1. Fast and efficient 3 stage Smart Battery Charger with protection against over charging.
  1. Suitable for Power Plant, Generator Battery Charging.
110V Battery Charger

Specification for 110V Automatic Battery Charger
Model : ABC – X – 110V – 1B – YYYA - A

1.

Input Voltage

X

Nominal Input Voltage

Input Voltage Range

1

110 VAC Single Phase

90 – 132 VAC

2

230 VAC Single Phase

180 – 264 VAC

12

110/230 VAC Switchable Single Phase

90-132 / 180 - 264 VAC 

2.

Frequency

: 47-63 Hz

3.

Input

: Through 3 core cable and 15 A 3 pin plug provided on the side of   
Battery Charger.

4.

Battery Charger ON/OFF Switch

: 16 Amp rating Rocker Switch with Neon Indicating lamp Provided
on the Front Panel.

5.

Battery Charging Voltage
(1) Auto mode

 

 

(2) Manual mode

 
: (1) 134.2 V+/- 0.5V in Boost & Absorption mode.
Boost voltage fine adjustment through preset on the front panel.
Adjustment range 132.7 V to 135.7 V.
: (2) 124.3 V +/- 0.5V in Float mode
Float voltage fine adjustment through preset on the front panel.
Adjustment range 122.8 V to 125.8 V.
: (1) Continuously adjustable from 105 V+/- 1.0 V to 135 V+/- 1.0 V through multiturn pot.

6.

Current Ratings
Code YYYA

4 Amps Max

6 Amps Max

7.5 Amps Max

10 Amps Max

4A

6A

7.5A

10A

7.

Charging Current

: Maximum charging current can be Adjusted  from 10 % to 100 % of 
Current rating with multiturn pot.  Maximum charging current limit
should be set as per battery capacity.

8.

Battery Switch

MCB 3A,
1 pole

MCB 4A,
1 pole

MCB 10A,
1 pole

MCB 10A,
1 pole

9.

Protections

: Battery Charger protected against Over Load, Short Circuit, Over Voltage,
Over Temperature & Reverse Input.

10.

Display
Voltmeter

Current Meter

3 1/2 Digit DPM for displaying Battery / Charger voltage (in volts).
Accuracy 0.2V +/- 2 digits 

3 1/2 Digit DPM for displaying charging current (in Amp).
Accuracy 0.2A +/- 2 digits

11.

Battery Connector

TB 56 series 8 position

12.

Charging Stages

 

: Boost charge
: Absorption charge
: Float charge

13.

Indications

: Red LED for Boost stage
: Yellow LED for Absorption stage
: Green LED for Float stage (Indicating   Battery  is fully charged )
: Red LED to indicate Reverse Battery Connection.
: Green LED each for Manual & Auto Mode.

14.

Enclosure

: IP 20.

15.

Mounting

: Provision for Table top and wall / Panel mounting.

16.

Size

: 320(W) x 350(H) x 150(D) MM

17.

Weight

: 13 Kg.

Specifications subject to change without notice.

TOP